The towels are progressing, I’m not sure if I’ll get two more out of this warp before I reach the end. It’s starting to have tension problems, like some ends are slack and I keep catching them with the shuttle. It’s not huge, but enough to be annoying. I’m not sure if it’s something about the yarn or some lousy technique on my part. I had another end break, although fortunately this time it was on the very edge and it happend between towels. So it won’t be a problem at all once I get everything finished. I’m not so thrilled with this 8/2 yarn. It’s ok, it’s not like I’m not going to use it for warp again, but it’s not as strong as I’d like. I’ve used much finer mill ends as warp and didn’t break a single end, so to have this stuff break is a pain.

Now sticking open when I release the treadles, that’s annoying. I’m still having problems with that, sometimes two harnesses are stuck up at once. It’s the lamms, the bar across the bottom the treadles are attached to, that is actually causing the problem. I may have to go at them with the file again. But I’ve solved the skating across the floor problem. The loom was slowly creeping backwards towards the wall, so I got some wood to put between the front and the baseboard. One of these days I’ll properly finish it rather than just wrapping it in a scrap of cloth, but it works.

I went to the local weavers guild meeting yesterday, I already know several members so that was nice. I got a lot of helpful suggestions for online resources for design ideas and weaving design software. I downloaded a demo of one, the only one I could find that ran on OS X. It’s hugely expensive so I can’t afford to buy a copy, but I’ll play with it for a while. I’m sure there’s a temporary way around the time limit for now. All I really need is something that will generate cloth diagrams but it does all this fancy stuff I’ll never use. I don’t have a computer-controlled loom and I don’t expect to have one for a long time. It will generate semi-random patterns from your design, but I quickly noticed that only some of them would actually weave stable fabric. Some had big blocks of no interlacement between warp and weft or huge floats, things that make for no fabric at all, not just poorly-made fabric. So it can do some interesting things and let you play with design ideas, but you still have to know what you are looking at.

Leave a Reply

Creative Commons License

© 2004-2007 Andrea Longo
spinnyspinny at feorlen dot org