SpinnySpinny

Finally the brown cotton is done. Now I need to ply it. I tried but I immediately had problems with it snarling and breaking. I’m going to let it sit on the bobbins a while and hope it’s better behaved in a few weeks. I did some experiments with the other cottons I have but I still have to decide what I want from them.

In the meantime, there’s plenty more to do. I’m working on one of the blending skeins, I’ve decided to do the two ply as one of bamboo/tencel and the other of ingeo/silk. Each pair is close in length, which makes things a lot easier. The tencel is very shiny and the bamboo is not, together they are a nice in-between. I’m blending blue ingeo with bombyx top. It comes out sky blue with little white bits from the neps in the silk. (Just like the brick, it’s not great silk. Same source, too.) I just spent about four hours blending 18g of dark blue ingeo and white silk and I still have to make the rolags. Blending anything takes a long time with hand cards, even more for very different colors. The bamboo and tencel should be easier, I’m doing that with a hackle. (Well, a wool comb actually.)

A few days ago I pulled out a bunch of odds and ends from the combing waste and today I dyed it yellow-gold. I’m going to use it to reproduce one of the millspun yarns. Leftover junk is pretty close to “Approximately 100% Wool” if you ask me. That’s what that yarn is, take all the stuff hanging around and make something from it. Now I have to try to match it.

No, the cotton is not done yet. But I did some other things at least.

This week I had my first real try at reeling silk. I did a basic how-to with a friend some months ago but he set everything up and we all just tried it for a few minutes. He was still there, but I did nearly everything so I could learn to use the equipment. It went exceptionally well and I got some very fine filament silk out of it. Now I have to decide just what I want to do with it. I have been thinking of using this for the medium silk skein and I have some ideas of how to do it. Now I can try some out and see what I think.

Today I went to a sheep shearing party. There is a park in San Ramon that is a farm, they have sheep for dog training. Every year there is a public event for shearing and there are demonstrations, kid art projects and so on. A bunch of local spinners went to more-or-less sit around and be colorful atmosphere and answer questions about spinning. It was windy and hard to get much spinning done but we had a good time showing off our stuff. Also, we can get basically all the wool we want from whatever is not claimed by someone else. It’s not great stuff, but it’s ok and I always need more dirty greasy wool, right? Yeah. Well, anyway, I came home with a bunch of wool that I have to figure out what to do with. I have a small bag of some kind of Suffolk that I think I might use for my remaining wool COE skein and a random fleece that looked usable. It was finer than most and not particularly nasty, even if it’s shorter than I like. The shearer was keeping some fleeces to sell to the local wool pool, but only the white ones so this landed in the discard pile. It’s several shades of gray, I sorted it out back and washed up some samples to have a look.

So now I’ve got the second bobbin of brown cotton started. Just as dull as the first. I’m getting slightly less broken yarn so far, but only by kicking The Boyfriend out of the house to remove distractions. I’m hoping to get this done before the weekend but that is going to require a lot of spinning time. I don’t normally have muscle aches after spinning but using the fastest ratio takes more effort to treadle and it’s leaving me with lower back pain. But, strangely, not anywhere else. It’s still not what I would call aerobic exercise, however.

I have such a light tension that I get some snarls winding on. But I can’t increase it or the yarn will break even more. I don’t normally rewind bobbins before plying, but the snarls will cause problems so I rewound the first bobbin to another to fix it. I’m strangely happy that it only broke three times in the process. Better now than during plying, anyway. I got some cardboard storage bobbins for this sort of thing but I don’t want to ply this fine yarn untensioned. I just used a spinning bobbin I don’t expect to need right away. Normally I don’t bother because I wind pretty evenly while spinning. Yes, winding a nice even storage bobbin makes for easy plying. But as long as you pay attention and not make horribly uneven and loose bobbins while spinning, it isn’t such a big deal. I rarely do it for any reason other than I need an empty bobbin and I don’t want to toss the yarn.

Nothing much going on except more cotton. I’m finally almost finished with the first bobbin. I am still losing a lot to broken yarn, although I’m getting better at catching thin spots before they break. Rethreading the flyer wastes a lot of time. Fine cotton is some of the most boring stuff ever, I’m not so hung up on spinning that I won’t buy yarn if I can get basically the same thing millspun. I’m not interested in strange colors so basically what I’m making is the same stuff I have cones of in storage for weaving. I like working with handspun wool because I start with fleece and there’s lots of interesting natural colors and textures to work with and I can prepare it exactly the way I want. I think most commercially prepared wool is just as boring as this cotton, punctuated only by picking out bad bits from lousy high-speed prep.

I never liked spinning cotton before and I hate it even more now. I can’t do it if I’m the least bit tired. I tried to spin yesterday when I had a few minutes and I broke more yarn than got on the bobbin. I still haven’t had a chance to do much with the charka, I hope to have some time next week to take it over to the library. It’s been too windy to sit outside and spin. Sometime when I’m not tired and not driving all over creation or any number of other non-textile things. I stopped by the office yesterday afternoon for what I thought would be just a minute or two and ended up spending the next several hours with a soldering iron (and remembering why I will never make it as an electronics tech.) So much for getting any spinning done. But all that stuff gets shipped off Monday, with the people soon thereafter. I could go spin in the office while they are gone. Daylight! Open windows!