Posts tagged ‘mohair’

A little bit of spinning, a lot of paper today.

I did the Romney/mohair blend single, but I’m not happy about what the bamboo/tencel blend is doing so I scrapped that idea. I’m trying to come up with two more fibers to blend. I did my really sloppy punis from the Pima cotton, after taking out all the seeds and a pile of trash. I can see it isn’t going to all fit on the high speed bobbins, so I will have to do two. That’s ok, at least. I may just splice the ends anyway. I could use that for the cotton swatch, as weft. It’s textured, all right, but that also means it’s not very strong. I’d have to find something to use for warp and pull out the table loom, but it wouldn’t take much yarn.

I set up the printer, assembled a box and started dealing with packaging. I have to go get more file folders, but at least I can get going with the labels. It took hours to set up the templates because the ones I downloaded from Avery didn’t align correctly. And then I had to create all sorts of nested tables to get the layout right. But now I have them all ready. Even the two inch lines, one half inch from one short edge and one quarter inch from one long edge. What a pain. Still haven’t cut the cardboard tags that go with those, however. While I’m out getting file folders, I need to look at staplers and three hole punches. If they are cheap enough, I might get my own instead of trying to borrow them. I’ve been meaning to get new business cards just for the website, too. Three blocks away and I can’t manage to get the the office supply store.

After test printing a few things from the website, I was reminded how much I adore stylesheets. Since I have put things in a binder, I need a left margin on all the pages. So I changed one line in my stylesheet and there it was. I didn’t even have to mess with the website, I just created a custom version that I can tell my browser to use. The only other thing to do before I start printing for real is create a new blank page footer. I have to take out the SpinnySpinny part so nobody knows who I am. (As if.)

I plied the tiny cotton, I didn’t like how it looked as a two-ply so I’ve decided to take it and four ply that. So I gave it a lot of twist and wound it off to measure. I’m really close, so I have to wind bobbins by length to make sure I ply every last bit of it. And, yes, there is about 550m of two-ply there, about what I guessed. There is only a little bit of the original single left so I was even very close on that. This brown cotton is combed, but there is still a lot of short fiber and a little trash in there and that makes it impossible to get a really even yarn. And in a two-ply, every little bit of variation shows. I still had the other multiple ply medium cotton to do, so I decided to use it for that. With an eight-ply, it all evens out.

I did the spinning wheel yarn in a day, I just have to measure and wind the skein. It’s fine enough that I’d rather not put it on the swift, so I took it from setting the twist on the skein winder to a ball. It’s something like 60 wraps per inch, that makes it extra fine. It’s basically the same single as the Andean weaving yarn but with a little less twist. I didn’t sort the Romney for color this time and the lighter color fibers tend to be slightly longer than the dark, so the color gently shades from dark to light with each comb batch. It’s an interesting effect that makes a semi-random narrow stripe warp, but it’s not so good for weft. The shorter length of each back and forth pass of the weft means large blocks of color.

Next is going to be the blend two-ply, I think. I did the mohair and wool on the drum carder a few days ago, the bamboo and tencel has been sitting around for a while. I have a lot of things to finish, I’m going to do as much spinning as possible next week when The Boyfriend is out of town on business.

Creative Commons License

© 2004-2007 Andrea Longo
spinnyspinny at feorlen dot org