SpinnySpinny

Finally some fibery stuff happens around here, in between the coughing and post-nasal-dripping and all that fun stuff. It’s nice to know that when you can’t do anything involving complex thought, there is still fleece to sort. Or something like that. I’m finally getting on with the huge backlog of dirty fleece and even doing a bit of spinning.

I started a mindless project with some Ashland Bay multicolor Merino top, a scarf for The Not-Really-Allergic Boyfriend. It’s all single, with warp and weft of opposite twist. I picked up some burgundy to go with the purplish multi warp, but I think I’m going to end up with black weft. I still haven’t resolvevd the loom question, however. This needs a proper modern multi-harness loom and I don’t think I will survive using the table loom on the floor. But I don’t have to decide yet, I’ve only promised to have it finished by February.

It’s nice to finally do something rather than make samples all day long. And something that isn’t fussy and tedious. It will be a little uneven and that’s ok. I’m enjoying the part where I buy the fiber ready to spin, but not so much the bits I have to pick out of it. I’ve never seen a commercial wool I’ve been entirely happy with, there are always neps or VM or even sometimes lumps of nasty stained fiber. And it’s never as long a staple as it could be. As much work as it is, I will continue to scour and comb my own because the results are so much better.

I plied the tiny cotton, I didn’t like how it looked as a two-ply so I’ve decided to take it and four ply that. So I gave it a lot of twist and wound it off to measure. I’m really close, so I have to wind bobbins by length to make sure I ply every last bit of it. And, yes, there is about 550m of two-ply there, about what I guessed. There is only a little bit of the original single left so I was even very close on that. This brown cotton is combed, but there is still a lot of short fiber and a little trash in there and that makes it impossible to get a really even yarn. And in a two-ply, every little bit of variation shows. I still had the other multiple ply medium cotton to do, so I decided to use it for that. With an eight-ply, it all evens out.

I did the spinning wheel yarn in a day, I just have to measure and wind the skein. It’s fine enough that I’d rather not put it on the swift, so I took it from setting the twist on the skein winder to a ball. It’s something like 60 wraps per inch, that makes it extra fine. It’s basically the same single as the Andean weaving yarn but with a little less twist. I didn’t sort the Romney for color this time and the lighter color fibers tend to be slightly longer than the dark, so the color gently shades from dark to light with each comb batch. It’s an interesting effect that makes a semi-random narrow stripe warp, but it’s not so good for weft. The shorter length of each back and forth pass of the weft means large blocks of color.

Next is going to be the blend two-ply, I think. I did the mohair and wool on the drum carder a few days ago, the bamboo and tencel has been sitting around for a while. I have a lot of things to finish, I’m going to do as much spinning as possible next week when The Boyfriend is out of town on business.

The past few days have been spent dealing with a mountain of fleece. No, I didn’t buy it at Spinners day at the Winery. (I’m negotiating that for later.) Long, long ago, like in February, I asked The Boyfriend’s uncle if he could get a little bit of wool from his neighbors. He lives in 4H land, and I was looking for meat sheep fleeces for the woolen stuff. I didn’t hear anything, so I went and found my own. Well, this week I get a cryptic email about Dorset fleeces. I go to the mailbox and there is a huge box containing two Dorset fleeces. Yikes. They are stinky and dirty and smell more like barnyard than sheep. They are also full of hay, burrs, dirt and all kinds of things. I went through both to see what I could use and out of two large garbage bags I got one small one of stuff I might be willing to do something with later. The fiber itself isn’t bad, it would be good for sock yarn or cold weather sweaters or things. But I have plenty of other fiber that doesn’t need nearly as much work. It’s very kind of him to go through the trouble to locate and mail me the fleeces. And at the time I did need such things. But Oh Boy.

In the middle of all that, I’m still trying to get yarn done. It’s getting to the point where I’m sick of pretty much everything and I want it to all be over with. I needed to ply the cotton for the fine two-ply, so I took a look at how much a nightmare that might be. Earlier attempts were a mess, so I decided to let it sit on the bobbins a while. It’s only a little better now. I finally wound the two singles together on a bobbin so I can ply without also fighting snarled, tangled yarn. It only broke about a dozen times in the process because I went r e a l l y s l o w l y. It took hours just to wind the bobbin and I still have to actually twist it.

I’ve decided to do the spinning wheel skein as the single from the Andean weaving yarn. It’s tiny, but it’s fast and it’s something I can do without much thought. I started flicking more Suffolk to do the spindle wheel yarn, I will drum card it if I can but there are several other things ahead of it in the queue. I am still avoiding the small supported spindle. I should just get the large supported spindle thing over with, but I don’t know what I want to do with that yet. Maybe more Suffolk. Whatever it is, it will be large. And I’m not doing it with the long “Navajo” spindle, either. I don’t like them for soft yarns because the part that spirals up the shaft gets mashed while you are spinning. I have other large spindles, or I can take that same huge whorl and put it on a shorter shaft. Any bottom whorl spindle becomes a supported spindle by setting it down. Nothing fancy about it at all.

Another weekend of spinning. This is about how it’s going to be until everything is done. I finished more yarns over the weekend and now that The Boyfriend is done borrowing my camera I’ll get pictures taken. A local knitting group did a dye workshop a few blocks away, I stopped by for a visit Saturday afternoon and ended up with a bottle of extra dye. I need to dye some of the Andean two-ply for the traditional three color patterns, so now I have medium gray, white and blue. The white is from a Blue-faced Leicester top I picked up for fun, it’s similar fiber although not so long a staple length.

I also did the drop spindle skein, again because I didn’t like how it came out the first time. The fiber for that was a grab-bag of fleece that appears to be Border Leicester. It was cotted (tangled) and had some color variation, so I flicked, drum carded and then combed just a little. Saturday I reeled some silk and Sunday was the guild meeting where I did fiber prep. I tried an experiment with the mystery farm fleece, a 4/3 12-ply cable. It was lofty and bouncy and huge, and with that many plies it doesn’t matter what the single looks like. But the fiber is filthy, so there I was with the dog brush yet again to get the junk out. It’s short and fine and crimpy but obviously has some down breed in it. The woman from the farm thinks it might be part Rambouillet, closely related to Merino, but there’s no way to really know.

Today I’m working on the remaining woolen with the Suffolk fleece. I used a friend’s drum carder to make batts and now I’m tearing them into chunks to make rolags. I couldn’t do it with hand cards because I couldn’t get batts large enough for the yarn I need. I’m also doing it with the quill, because it has to be large and low twist. Long draw works really well that way and the Lendrum quill head is huge. It’s weird to work with this big spike pointing directly at me, I can’t draft as far as with a normal position but this yarn doesn’t take long. Even if it’s still slower to spin than it should be because I have to get it as perfectly even as possible. Woolen just doesn’t like to do that.

Before I started this project, I carded something maybe once a year. Once upon a time, when I had space for a drum carder, I would save up various bits and pieces and throw it all together for some random yarn for things like holiday gifts. I didn’t actually own a set of wool cards until recently and my cotton cards were mostly used as large flickers. I like smooth thin yarns and big pointy wool combs. I hate hand carding. But for most of these small skeins, it’s faster to hand card than go over to somebody’s house to use the drum carder. I’m only doing it if I really have to. I tried to hand card the Suffolk for the thick woolen, but I just can’t get a rolag big enough for the yarn I want. So I added it to the pile for the next drum carder visit.

Yesterday I was hand carding tow flax, of all things. I had saved up all the nasty bits from the Louet Superfine Top and I was thinking of using it for the thick linen yarn. So I made a pile of flax rolags. And I thought the llama was bad! The stuff gets all over the place, I don’t want to think about what I inhaled in the process. Then I sat down in front of a big pointy spike, err, the quill wheel, and spun a huge lumpy linen yarn. It was huge. And lumpy. Oh, and it’s fuzzy too. A little too fuzzy, actually. All that short fiber makes something that looks like burlap gone wrong. New content for the Misfits page! Well, at least it didn’t take very long. I’ll try it again after I do all the line flax, because I’ll have plenty of new tow from that. Better stuff, too.

This afternoon I started on one of the yarns I actually like. After that annoying cotton, I need a distraction. I’m doing Andean weaving yarn for one of the plying skeins. It’s a fine, high twist two-ply and not the least bit balanced. It’s not supposed to be. Since this is ignoring the requirement for balanced yarn, I’m also doing the plying swatch in Andean style weaving to show the results. The overtwist keeps the yarn from shredding — Peruvian backstrap weaving laughs at your wimpy yarn! This is my favorite type of yarn to spin and the Romney fleece I’m using goes fast. Of course, having the wheel set at 44:1 doesn’t hurt. The finished two-ply will be about 16 wraps per cm, or 40 wraps per inch. I ♥ Teeny Tiny Yarn!